DarVi ElectroFence- INTELLIGENT FENCE CONTROL SYSTEM

TAK Technologies Private Limited provides a long lasting round the clock vigilant electric fencing solution, for home, commercial and infrastructure security, with zero maintenance cost. DarVi ElectroFence systems are non-lethal, electric fence solutions specifically designed for perimeter security and protection applications. Our monitoring scheme uses Adaptive Digital Technology (ADT) which allows for advanced warning of any fence breach or tampering, It has the capability to identify the specific segment should an intrusion occur, meaning that security resources can quickly be directed to where they are required.

Entire fence can be divided into number of user-defined zones lengths, and can be monitored & controlled remotely by using custom software, which enhances the operability of perimeter security. The number of electric fencing zones and the number of fence wires can be increased as per user requirement.

The energizer/controller conforms to IEC 60335-2-76, IS-302-2-76 standards.

The fencing solution is aimed at the following functional features:

DETERRENT

Psychological deterrent
Non-lethal shock (5.5 kV -9.9 kV DC peak voltage pulse)
Anti-Climb installation

INTELLIGENT DETECTION

Intrusion detection upto 20-25 mtr accuracy
Adaptive or moving alarm threshold
Detection capability even at 400-500 volts.
Detecting multiple simultaneous intrusion in different zones

HYBRID ARCHITECTURE

Single/dual zone energizer
User defined zone lengths
Operable on commercial power or solar (optional)
Battery backup of 12-24 hourse

ANNUNCIATION

Response time< 1 second
Intelligent alarm annunciation in field and CCC
Minimum CFAR

PERFORMANCE CRITERIA

The intruder will receive a Non-lethal shock from the fence control system under the following conditions:

HV and LV wire is touched
Cutting of wires
Shorting of wires
Power failure alarm
Earth fault detection
Low battery alarm
Cabinet door open

DarVi ElectroSecure SOFTWARE

A dedicated central monitoring workstation at Command and control Centre(CCC) is installed with ElectroSecure fence monitoring software and has the following features:

One software, unlimited licenses
Geo-mapping (mimic) of perimeter fence with zones, citing individual zone status and energizer status graphically.
Zone wise arming and disarming
Zone wise indication of fence voltage, fence controller status, availability of the input power in the field, power fence alarm status and enclosure / controller status.
Engineering functions such as add new energizers, defining new loop(s)/areas and alarm system configurations.
Event and alarm logging
Report generation and archiving